BFBTD - ABLETHERM 7-1.5-PART A

  • MSDS: BFBTD
  • Manufacturer: ABLESTIK LABROATORIES
  • Product Name: ABLETHERM 7-1.5-PART A
  • National Stock Number: 5970-00-503-2433
Product Identification

Product ID:ABLETHERM 7-1.5-PART A
MSDS Date:01/01/1987
FSC:5970
NIIN:00-503-2433
MSDS Number: BFBTD

Responsible Party
ABLESTIK LABROATORIES
833 W. 182ND ST.
GARDENA, CA 90248-3409
US

Cage: 9V874

Contractor
ABLESTIK LABS SUB OF NATIONAL STARCH AND CHEMICAL
COMPTON, CA 90221 US

Telephone: 310-764-4600

Cage: 21109

Ingredients

ETHYL SILICATE

CAS: 78-10-4

RTECS: VV9450000

Fraction By Weight: <1%.

OSHA PEL 100 PPM

ACGIH TLV: 10 PPM; 9293


2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: <0.1%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

Hazards

Effects of Overexposure:EYE/SKIN:IRRITATING;INH:IRRITATING.

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.ING:SEE
PHYSICIAN IMM.

Fire Fighting

Flash Point:112F,44C,PMCC
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SCBA.
Unusual Fire/Explosion Hazard:TOX.FUMES OF HCL FORMED ON COMBUSTION.

Accidental Release

Spill Release Procedures:WIPE UP W.SOLVENT SATUTATED TOWELING AND
COLLECT IN APPROPRIATE CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:STORE FROZEN AT ALL TIMES.
Other Precautions:AVOID CONTACT WITH SKIN,CLOTHING.GOOD HOUSEKEEPING IS
REQUIRED.

Exposure Controls

Respiratory Protection:NIOSH APPVD.ORG.VAP.RESP.IF TLV IS EXCEEDED.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:RUBBER
Eye Protection:SFTY GOGGLES W.SIDE SHLD.
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATED JAN.86/

Chemical Properties

HCC:F4
Spec Gravity:2.2
Solubility in Water:NEGL.
Appearance and Odor:WHITE,SLIGHTLY FLOWABLE PASTE,ODORLESS.
Percent Volatiles by Volume:<1.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO,SIO*2,CO*2

Disposal

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.